Left or right hand door: how to tell which you need
Stand outside facing the door: hinges on your left is a left hand door, hinges on your right is a right hand door. Worked examples, plus how single, composite, French and patio doors are named.
How do I tell a left hand door from a right hand door?
Stand outside, facing the door, and look at which side the hinges are on. Hinges on your left make a left hand door, shortened to LH. Hinges on your right make a right hand door, shortened to RH.
All handings are viewed from the outside, on every door in the doors range.
Worked example, left hand. You stand on the step facing your front door and the hinges are on your left. That is a left hand door, so order LH.
Worked example, right hand. You stand on the path facing your back door and the hinges are on your right. That is a right hand door, so order RH.
When you replace an existing door, stand outside facing it and note the hinge side before you order.
How are single doors named left or right hand?
The name carries the hand, read from the outside. The uPVC single doors are all listed Open In, so they open inwards, and each width comes in both hands.
| Range | How the hand appears | Example |
|---|---|---|
| Double glazed single doors | Left hand, then Open In | Full Glass Left hand Open In 840mm x 2090mm |
| Double glazed single doors | Right hand, then Open In | Full Glass Right hand Open In 920mm x 2090mm |
| Triple glazed single doors | LH or RH | Half panel Grey/White LH 840 x 2090mm Clear |
| GRP composite doors | LH or RH | Two Square Glass White LH and RH |
The Cottage Long Glass composite names end RR and RL, for right hand and left hand. The GRP composite door guide lists all six designs.
How are French doors handed?
Every French door here is listed left hand master, with the handing read from the outside, the same viewpoint as a single door. French doors are a pair of leaves that open the full width of the opening, in seven widths from 1190mm to 1790mm.
See the grey 7016 and white 1690mm x 2090mm pair for a listing. If your room needs the other way round, ring 0151 525 4488 before you order. The French doors category has the double and triple glazed ranges.
Which way does a sliding patio door slide?
The sliding patio doors are named by the direction they slide, left to right or right to left, and the handing is viewed from the outside. Stand outside facing the door and match the direction in the name to the way you need it to slide.
Both directions are listed in all four widths, 1490mm, 1790mm, 2090mm and 2390mm, which covers every combination. The slide direction is part of the listing, so choose it before you order. Check the product picture, such as the one on the 2390mm x 2090mm left to right door, and ring 0151 525 4488 if you are unsure which suits your room.
What do I check before I order?
- Work out the hand from the outside, using the hinge side or the slide direction.
- Measure the brick opening at three points across and three up, and use the smallest figures. Take off the allowance your installer wants, commonly about 10mm. How to measure for uPVC windows and doors gives the full method.
- Choose the glazing. Double or triple glazing sets out the choice.
- Read the name for the size, colour and hand, because each listing is one fixed combination.
What to buy
- uPVC single doors, left and right hand
- GRP composite doors, left and right hand
- French doors, left hand master
- Sliding patio doors, left to right or right to left
- All doors
More guides
-
110mm soil pipe sizes and fittings: bends, branches and vent cowls
The 110mm push fit soil and vent system: pipe, bends, branches, access fittings, clips and vent cowl, how they go together, and how it differs from underground pipe.
-
32mm and 40mm waste pipe sizes: which for basin, sink and bath
Which waste pipe size suits a basin, sink, bath or shower, what 32mm and 40mm pipe clips are for, and the parts to buy for a basin and a kitchen sink.
-
Bathroom ceiling cladding: choosing PVC ceiling panels and trims
Which PVC ceiling panel length suits a bathroom or kitchen, how many panels to order, battens or direct fix, edge trims and coving, and what to ask an electrician about lights.